Revit Horizon 3 H2O, textile pants waterproof

The Horizon 3 H2O motorcycle pants allow you to create a fully laminated, top-to-bottom waterproof motorcycle suit when paired with the Horizon 3 H2O motorcycle jacket. Laminating REV'IT!'s hydratex|Lite membrane directly to the outer shell creates a 100 percent waterproof motorcycle pant with zero water absorption.

Adjustable SEEFLEX Level 2 knee protectors come standard, as do the extremely thin, equally certified SEESMART hip protectors. Like the motorcycle jacket of the same name, the Horizon 3 motorcycle pants are also equipped with the VCS|ventilation system. The large ventilation panels on the thighs can be opened while riding, thanks to clever, innovative magnetic closures. After opening, two large mesh inserts are revealed, which direct cooling air directly to your legs.

Two practical pockets transport smaller items close to the body, and thanks to the removable thermal lining, the Horizon 3 H2O motorcycle pants can withstand sub-zero temperatures. Grip inserts on the back of the motorcycle pants prevent you from sliding around on the seat when accelerating or braking, various adjustment tabs and straps ensure a perfect fit to your body.

Features

• Polyester matte 450D 2L and ripstop polyester 2L material.
• Multi-season laminated pants
• hydratex®|Lite membrane
• Removable thermal lining
• VCS|ventilation system
• Aquadefence panels on the thighs
• Adjustment strap at waist
• Adjustment strap at ankle
• Two front pockets
• 3D mesh inner lining
• Adjustable protector pockets
• B-Lock button closure in front
• Anti-slip material on seat
• Long/short connection zipper
• Prepared for suspenders Strapper
• Certified protective clothing
• SEEFLEX™ Level 2 knee protectors RV14-L2-B
• SEESMART™ Level 1 hip protectors RV33-L1-B
• Laminated reflective material on the calves
• This garment is certified to EN 17092 standard, published in 2020, and meets protection standard AA

hydratex®|G liner

This waterproof coating is applied to the inside of the lining, and the seams are sealed to ensure the garment is waterproof. The REV'IT! hydratex®|G-liner coating is used in the manufacture of products that require basic all-weather protection.

hydratex|Lite waterproof membrane

Waterproof membrane that provides all-weather protection with just a single layer. The outer shell has a waterproof coating on the inside that prevents rain and wind from penetrating. At the same time, the micropores allow sweat to escape to the outside. So you stay dry and warm, without unpleasant moisture.

Removable thermal lining

On mornings, evenings or whole days with low temperatures, the thermal lining provides warmth. The same applies to tours in the mountains: warm in the valley, thermal lining out. Cold on the pass, thermal lining in. This lining allows you to use the garment throughout different seasons. Taking it out or putting it back in is a matter of seconds.

SEEFLEX™ Level 2 Protection

Certified to EN1621-1:2012 Level 2, the SEEFLEX™ protector is an innovative creation from REV'IT!'s in-house research and development department. This standard also measures impact forces in different plus and minus temperature ranges.

SEEFLEX™ protectors far exceed the standard without sacrificing comfort. Due to their open structure, they are breathable and allow air to pass easily, preventing hyperthermia of the rider.

SEESMART™ Level 1 protection

SEESMART™ protectors offer the highest level of mobility yet pass EN1621-1:2012 Level 1 impact tests in both normal and hot (T+) conditions.

Lightweight, highly ventilated and extremely flexible, SEESMART™ protectors are virtually imperceptible when riding, although they are of course up to the task of protecting you in a fall.

Thanks to their flexible design, these protectors sit close to your body and follow your anatomy. They allow for a snug fit and slim silhouette of your motorcycle clothing, keeping you looking effortlessly stylish while you enjoy the full benefits of top safety equipment.

VCS|aquadefence System (patented)

REV'IT! developed the system to improve ventilation in garments that require high waterproofing, and it was a real challenge. In doing so, the GORE-TEX approved system is one of the best - if not the best - available for motorcycle clothing.

When open, the Aquadefence system allows direct ventilation to the body. When the zipper or panel is closed, it attaches to the integrated rain gutter. The jacket is then 100 percent windproof and waterproof because this gutter prevents water from entering through the ventilation holes, you stay dry and feel good (EU patent EP 2574249, US patent US 13/630,520).