Highsider E-Box TYPE 1, DRL control box

HIGHSIDER PW E-BOX TYPE 1, for DRL switching by light sensor - for automatic switching between daytime running light and low beam.

The HIGHSIDER PW E-BOX TYPE 1 detects when it gets dark or light and then automatically switches the low beam on and at the same time the daytime running light off (or vice versa). Additionally equipped (optionally switchable) is the so-called COMING HOME FUNCTION. This allows the daytime running lights to remain on for a further 30 seconds after the motorcycle has been switched off in the dark. No switch is required.

Dimensions

• Height: 16 mm
• width: 56,5 mm
• Width with mounting straps: 75 mm
• Length: 48 mm
• Mounting straps: 3 mm x 11 mm (slotted hole)
• Weight: 46 g
• Cable length: 400 mm
• Cable length light sensor: 600 mm (total)

Connections

• Purple/Black cable = High beam IN
• Yellow/Green cable = parking light IN
• Black cable = ground IN (-)
• Red cable = supply voltage IN (+)
• Blue cable = low beam OUT
• Black cable = Ground OUT (-)
• Pink cable = Daytime running lights OUT (TFL)
• Orange cable = low beam IN
• Gray cable = programming cable
• Green cable = high beam OUT
• Brown cable = position light/parking light (OUT)
• Black cable = Ground OUT (-)
• White cable = TFL control light OUT
• 4 pin connector for the light sensor

Scope of delivery

• HIGHSIDER PW E-BOX TYPE 1
• Cable set
• Light sensor
• Manual

Note

• The E-Box is not compatible with the HIGHSIDER TYPE 8 headlights with bend lighting.